Kenworth T410 Скачать руководство пользователя страница 258

Страница: 258 / 418

Page 232

CAT: 8612 November 2019

PREVENTIVE MAINTENANCE

Lubrication

Cam-actuated brake components such as anchor pins and brake camshafts

are subjected to high temperatures. They must be lubricated with non-

melting, water resistant brake grease meeting R-S Specification 0-616

(NLGI-Grade 2).

• Lubricate according to Recommended Maintenance Schedules,

pages 315-342.

Do not apply too much lubricant to brake components - lubricate
sparingly. Excessive amounts of lubricant could contaminate

brake linings, which could reduce brake effectiveness and cause an

accident.

Brake and Slack Adjuster Lubrication

According to the interval, pressure lubricate the slack adjuster and brake

camshaft (bracket/tube). Two grease fittings are provided for both the

slack adjuster and camshaft (bracket/tube).

• Use standard chassis lubricant which meets No. 2 grade high

temperature, waterproof specifications.

• Do not use moly-sulphide loaded grease or oil as it may shorten

the service life of the slack adjuster.

Checks and Adjustments

Brakes should be checked regularly.
Always adjust the brakes when they are cool:

• Park the vehicle on a level surface and block the wheels before

attempting any brake checks or adjustments.

BRAKE LININGS

Brake linings should be inspected by a qualified technician at an authorised

service centre for wear. See Maintenance Schedule, pages 315-342. In

severe service applications, inspect the linings more frequently.

Содержание T410



































































































































































































































































































































































































































Результаты поиска

Содержание T410

Отзывы:

Похожие инструкции для T410

Бренды по названию

Популярные бренды

Kenworth T410, Руководство водителя

Результаты поиска

Содержание T410

Отзывы:

Похожие инструкции для T410

Бренды по названию

Популярные бренды