manualshive.com logo in svg

Kenworth T410, Руководство водителя


Поделиться
Скачать
background image

Page 176

 

CAT: 8612 November 2019

OPERATING INSTRUCTIONS

What to Expect When Using the Fusion System

Part One: All driving scenarios (Cruise is either “ON” or “OFF”)

What to Expect

Situation

Typical System 

Indication / Alerts

Typical System  

Actions / Cautions

Stationary objects/vehicles ahead in your lane of travel

A stationary – non-vehicle – 

object is detected ahead in 

your lane.

A Stationary Object Alert 

(SOA) may be issued up to 

three (3) seconds prior to 

impact.

None.

Warning

You must immediately act 
to potentially avoid, or 
lessen the severity of, a 
collision.

A stationary motor vehicle 

is detected ahead in your 

lane.

Note

Significant feature 

enhancement.
Factors that can potentially 

affect the system’s ability to 

identify a vehicle include: if 

the vehicle is not a licensed 

motorized vehicle; or 

certain types of trailers.

If the vehicle is traveling 

above 16km/h, a Stationary 

Vehicle Alert (SVA) may be 

issued up to three-and-a-

half (3.5) seconds prior to 

impact.

Warning

You must immediately act 
to potentially avoid, or 
lessen the severity of, a 
collision.

If a collision is likely to 

occur, the Fusion system 

can provide a warning and/

or apply the vehicle brakes.

Moving objects/vehicles ahead in your lane of travel

Your vehicle comes up fast 

behind a slower-moving 

detected forward vehicle.

Your vehicle comes up fast 

behind a slower-moving 

detected forward vehicle.

None.

You must respond as 
needed.

The detected forward 

vehicle slows rapidly.

The Following Distance 

Alert (FDA), or Impact Alert 

(IA) warning (continuous 

tone) will sound and a 

visual message/icon 

typically appears on the 

dash screen or DIU display.

None.

You must respond as 
needed.

If a collision is likely 

to occur, the collision 

mitigation feature will 

apply your vehicle’s 

brakes.

A pedestrian, deer or 

dog runs in front of your 

vehicle or any organic or 

nonmetallic object is in front 

of your vehicle.

None.

None.

You must respond as 
needed.

Содержание T410



































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для T410

FAW J6 Jiefang IV Series Operation Manual preview
J6 Jiefang IV Series
Бренд: FAW Страницы: 217
Einhell Global PHW 2002 Operating Instructions Manual preview
PHW 2002
Бренд: Einhell Global Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды