55
15 KDS-100
1
Connect one end of the KCT-39 to the transceiver. Refer to Section “11 KCT-39” for installation.
2
Connect the opposite end of the KCT-39 to the KDS-100.
3
Program the Function Port using KPG-80D, to activate the KDS-100.
4
Select “Edit > Function Port” in the Menu.
5
Select KDS-100 for the External Devices to assign functions to each port for operating the KDS-100.
Select KDS-100
All necessary parameters for the
KDS-100 are automatically
configured.
6
Select “Program > Write to Radio” in the FPU Menu.
7
The configuration data is sent to the transceiver.
8
The KDS-100 automatically activates when the transceiver is turned ON.
Note:
You must use KPG-71D to program the KDS-100.
Note:
Select “Edit > Optional Features > Radio” in the FPU Menu to program the logic of each port.
SQ
Squelch detect input
Active Low
DTC
Data TX channel Control output
Active Low
TXS/LOK
Transmitter active sense input
Active Low
AM
Speaker mute output
Active Low
MM
MIC mute output
Active Low
