Kenwood TK-7100H Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 75

background image

32

11 Clone Mode

11.1 Overview

This mode is used for copying the tranceiver’s
programming to another transceiver without using a
PC.

11.2 Function

Description

You must connect two transceivers using the Clone
Cable when cloning the programming information.
One transceiver must be the Clone Master while the
other is the Clone Slave. The Clone Master enters
Clone Mode and the Clone Slave enters normal
operation.

11.2.1 Preparing for Cloning

Connect the Clone Master to the Clone Slave using
the Clone Cable. The Clone Slave enters normal
operation. Press the [CH DOWN] key on the Clone
Master while turning it ON to enter the Clone Mode.
“CLONE” appears on the display of the Clone Master.

11.2.2 Starting the Cloning Process

Press the [MON] key on the Clone Master to transmit
the programming data. “-PC- “ appears on the display
of the Clone Slave and it starts receiving the data.

“End” appears on the display of the Clone Master
when transmission ends The Clone Slave transceiver
automatically activates with the new data. “ERROR”
appears when the cloning process fails.

11.2.3 Cloning

Additional

Transceivers

“END” appears when the transceiver ends cloning.
Press the [MON] key on the Clone Master transceiver
to enter the Clone Mode again. Press the [MON] key
again to transmit data. Repeat this operation to clone
the configuration data to several transceivers.

11.2.4 Data

Password

“CLN LOCK” appears when the transceiver enters
Clone Mode and a Data Password has been
programmed. In this case, you cannot use the
transceiver as the Clone Master until it is unlocked.

Enter the Data Password while “CLN LOCK” is
displayed to unlock the transceiver. Press the [CH
DOWN] key to confirm the Data Password. You can
use the transceiver as the Clone Master when it is
unlocked.

Note:

You cannot enter the Clone Mode when the Clone

Mode is disabled.

Note:

The Clone Slave cannot receive the programming data

when the Data Password is programmed in the
transceiver.

Note:

You cannot copy the programming data when the

model name and specification of the Clone Master and
the Clone Slave are different.

«
...
30
31
32
33
34
...
»

Содержание TK-7100H












































































Отзывы:

Нет отзывов

Похожие инструкции для TK-7100H

RCDC1 - IPOD/IPHONE ALARM CLOCK

Бренд: Panasonic Страницы: 2

Бренд: Tecsun Страницы: 36

ProTravel PT-50

Бренд: Sangean Страницы: 56

Бренд: SAIN SONIC Страницы: 18

Бренд: X4-TECH Страницы: 18

Бренд: Sangean Страницы: 84

Бренд: Telefunken Страницы: 18

Бренд: Magnasonic Страницы: 10

Бренд: Hyundai Страницы: 12

Бренд: RCA Страницы: 1

MICROTALK CXR800C

Бренд: Cobra Страницы: 18

Бренд: Sepura Страницы: 12

Бренд: i-box Страницы: 56

Бренд: Pacific Crest Страницы: 30

Бренд: TechniSat Страницы: 68

DIGITRADIO 370 CD IR

Бренд: TechniSat Страницы: 172

Бренд: TechniSat Страницы: 196

Бренд: SAF Страницы: 123

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды