0
COM port 2
To connect RF Deck 1 and RF Deck 2 by COM port 2 of a D-sub 25-pin connector, refer to the following wiring diagram
and create a D-sub 25-pin cable. (Refer to
Creating a Dedicated Mobile Relay Station Cable
In this case, “Custom Cable (Occupy COM port 2)” needs to be configured in
Mobile Relay Station DB-25 Cable
by
using KPG-D1/ D1N.
1
COM1 RXD
2
COM1 TXD
3
AUX IO 9
4
DI (Analog channel only)
5
6
GND
7
AUX IO 8
8
COM2 TXD
9
COM2 RXD
10
GND
11
AUX IO 7
12
AUX IO 6
13
14
15
16
17
GND
18
DEO (Analog channel only)
19
AUX IO 5
20
AUX IO 4
21
AUX IO 3
22
AUX IO 2
23
AUX IO 1
24
25
RF Deck 1
1
2
COM1 RXD
3
COM1 TXD
4
5
DI (Analog channel only)
6
7
GND
8
9
COM2 TXD
10
COM2 RXD
11
GND
12
13
14
15
16
17
18
GND
19
DEO (Analog channel only)
20
21
22
23
24
25
RF Deck 2
Figure 16-88 Wiring Diagram (COM port 2)
Note
0
For only an analog channel, DI (Pin 5) and DEO (Pin 19) are interconnected. This connection is not required for a digital
channel.
0
If “Cross Cable (Occupy COM port 1)” is configured in
Mobile Relay Station DB-25 Cable
, the following AUX ports do
not function:
0
DB-25 4pin
0
DB-25 8pin
0
DB-25 20pin
0
DB-25 24pin
0
If “Custom Cable(Occupy COM Port 2)” is configured in
Mobile Relay Station DB-25 Cable
, Built-in GPS Receiver/
Bluetooth cannot be used.
Configuration using KPG-D1/ D1N
Configuring
Mobile Relay Station DB-25 Cable
(
Transceiver Settings > Extended Function > Mobile > Mobile
Relay Station > Mobile Relay Channel List)
16 MULTI RF DECK/ MULTI CONTROL HEAD
16.18 Relaying the Received Signal (Mobile Relay Station)
Common FUNC (K, F)/Ver 2.20
329
