manualshive.com logo in svg

Kenwood NX-5800, Общий справочник функций

"Kenwood NX-5800" - мощное радиостанция для профессионального использования. На нашем сайте вы можете бесплатно загрузить сервис-руководство для этого устройства. Получите всю необходимую информацию для настройки и использования Kenwood NX-5800, скачав руководство с manualshive.com.

Поделиться
Скачать
background image

Function

Description

Ignore Encryption Switch

Alert Tone

This tone sounds from the transceiver when the 

PTT

 switch is pressed while the enabled (Secure) or disabled

(Clear) state of Encryption in a P25 system differs from the configuration in Encryption (Clear, Secure or
Select) for the channel or the Talkgroup ID List.

Site Trunking Tone

This tone sounds from the transceiver when the system enters Site Trunking Mode in a P25
Trunking system.

Bluetooth No Response Tone

This tone sounds from the transceiver if no response is received from a Bluetooth-
compatible device when approximately 10 sec elapses after pairing with the Bluetooth-
compatible device is started.

Bluetooth Connect Denied

Tone

This tone sounds from the transceiver if paring is denied by a Bluetooth-compatible device
after pairing is started.

Bluetooth Connect Invalid

Tone

This tone sounds from the transceiver if the PIN Code or Fixed PIN entered in the transceiver
is detected to be different from the PIN Code entered in a Bluetooth-compatible device after
pairing with the Bluetooth-compatible device is started.

Bluetooth No Service Tone

This tone sounds from the transceiver if pairing occurs with a Bluetooth-compatible device
which is not compatible with the transceiver.

Battery Level Tone

This tone sounds from the transceiver according to the battery status.

Delay Tone

This tone sounds from the transceiver between the 3rd and 6th attempts to access a repeater
by pressing the 

PTT

 switch in an LTR Trunking system, in order to notify a user that the

connection to the repeater has been delayed.

Intercept Tone

This tone sounds from the transceiver when the transceiver accesses a repeater by pressing
the 

PTT

 switch in an LTR Trunking system, and a user fails to connect to the repeater.

Intercept Tone 2

This tone sounds from the transceiver when the PF key to which 

Call 1

 to 

Call 6

 is assigned

is pressed or when the repeater is accessed for automatic transmission, such as of a Status
Message, and the connection to the repeater fails in an LTR Trunking system.

Deny Tone

This tone sounds from the transceiver if the transceiver cannot connect to an available RIC
repeater within 60 sec by using Auto Telephone in an LTR Trunking system.

Advanced GPS Report Error

Tone

In an NXDN Trunking system, this tone sounds from the transceiver at 30-sec intervals when
the channel for GPS data transmission becomes unavailable.

Low SD Memory Tone

This tone sounds from the transceiver when the available capacity on a microSD card
becomes 10 % or less.

Locator Tone

Locator Tone is the tone sounding from the transceiver before the transceiver starts automatic transmission in Emergency
Mode, and after the transceiver ends automatic transmission in Emergency Mode.
The volume level of Locator Tone can be configured using KPG-D1/ D1N. (Refer to 

Configuring the Volume Level of Various

Tones (Tone Volume)

.)

Table 6-5 Locator Tone

Function

Description

Emergency Locator Tone

A Locator Tone 1 sounds from the transceiver before the transceiver starts automatic
transmission in Emergency Mode.
A Locator Tone 2 sounds from the transceiver after the transceiver ends automatic
transmission in Emergency Mode.
In Emergency Mode, the transceiver repeats an automatic communication only the number
of times configured in 

Emergency Cycle

.

6 SOUND

6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed

Common FUNC (K, F)/Ver 2.20

111

CONTENTS

INDEX

Содержание NX-5800





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NX-5800

Safeline SL2 Manual preview
SL2
Бренд: Safeline Страницы: 20
NEC UNIVERGE SL2100 Networking Manual preview
UNIVERGE SL2100
Бренд: NEC Страницы: 196
NEC UNIVERGE SL2100 Hardware Manual preview
UNIVERGE SL2100
Бренд: NEC Страницы: 174
NEC ElectraElite IPK General Description Manual preview
ElectraElite IPK
Бренд: NEC Страницы: 151
iHome IA100 Instruction Manual preview
IA100
Бренд: iHome Страницы: 17
YORKVILLE EXM Mobile Service Manual preview
EXM Mobile
Бренд: YORKVILLE Страницы: 79
Bticino 323004 Quick Start Manual preview
323004
Бренд: Bticino Страницы: 2
Beyerdynamic MCW-D 200 Operating Instructions Manual preview
MCW-D 200
Бренд: Beyerdynamic Страницы: 112
RAM AUF200 User Manual preview
AUF200
Бренд: RAM Страницы: 22
M&S Systems dmc1/dmc1CD Owner'S Manual preview
dmc1/dmc1CD
Бренд: M&S Systems Страницы: 24
Teac Ghetto Blaster PBT1000 User Manual preview
Ghetto Blaster PBT1000
Бренд: Teac Страницы: 12
Idex MICROPUMP 668-400-2 Component Maintenance Manual With Illustrated Parts List preview
MICROPUMP 668-400-2
Бренд: Idex Страницы: 33
Harman JBL CINEMA SB400 Service Manual preview
JBL CINEMA SB400
Бренд: Harman Страницы: 33
Fermax evolution avisa User Manual preview
evolution avisa
Бренд: Fermax Страницы: 30
b-red VK01 US Installation Manual preview
VK01 US
Бренд: b-red Страницы: 12
Omnitronic XFM-212AP User Manual preview
XFM-212AP
Бренд: Omnitronic Страницы: 24
Polycom RealPresence Group 500 systems System Setup Sheet preview
RealPresence Group 500 systems
Бренд: Polycom Страницы: 2
Jeep MyGIG Information Manual preview
MyGIG
Бренд: Jeep Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды