14
If “FPU MISMATCH” appears on the transceiver after connection, write each RF Deck Data to all
transceivers.
0
Select “RF Deck Data A”, the data for VHF, from FPU Data Selection of RF Deck 1.
0
Select “RF Deck Data B”, the data for UHF, from FPU Data Selection of RF Deck 2.
0
Select “RF Deck Data C”, the data for 700/ 800 MHz, from FPU Data Selection of RF Deck 3.
After selection, the FPU data can be written simultaneously.
Figure 16-14 RF Deck Selection
16 MULTI RF DECK/ MULTI CONTROL HEAD
16.4 Configuring the Initial Configuration
Common FUNC (K, F)/Ver 2.20
257
