manualshive.com logo in svg

Kenwood NX-5800, Общий справочник функций

"Kenwood NX-5800" - мощное радиостанция для профессионального использования. На нашем сайте вы можете бесплатно загрузить сервис-руководство для этого устройства. Получите всю необходимую информацию для настройки и использования Kenwood NX-5800, скачав руководство с manualshive.com.

Поделиться
Скачать
background image

Function

Description

Queue Tone

This tone sounds from the transceiver while the transceiver is searching with the Auto Telephone
in an LTR Trunking system for an available RIC repeater to be connected. This tone sounds from
the transceiver every 1 sec until an available RIC repeater to be connected is found or Auto
Telephone is terminated if the transceiver cannot find an available RIC repeater within 60 sec.

Free System Ringback

Mode Tone

This tone sounds from the transceiver when the transceiver enters Free System Ringback Mode
in an LTR Trunking system.

Ringer Tone

This tone sounds from the transceiver when a repeater is temporarily available in Free System
Ringback Mode in an LTR Trunking system.

Priority-channel Tone This tone sounds from the transceiver when the scan is paused on a Priority-channel.

Scan Stop Tone

Pressing the 

Home Channel

 or 

Direct Channel

 key during the scan pauses the scan, and the

transceiver migrates to the Home Channel or Direct Channel. Also, pressing the 

Channel

Recall

 key during the scan pauses the scan, and the transceiver migrates to the last called Zone-

channel. This tone sounds from the transceiver at 30-sec intervals while the scan pauses.

Individual Call Mode

This tone sounds from the transceiver when the transceiver initiates a FleetSync Individual Call.

Fleet Call Tone

This tone sounds from the transceiver when the transceiver initiates a FleetSync Fleet Call.

Group Call Tone

This tone sounds from the transceiver when the transceiver initiates a FleetSync Group Call.

Search Mode Tone

This tone sounds from the transceiver when the transceiver initiates Forced Search in an NXDN
Trunking system.
This tone sounds from the transceiver when the transceiver initiates System Search in a P25
Trunking system.
This tone sounds from the transceiver when the transceiver starts searching for the repeaters that
can be synchronized in a DMR Conventional system.

Out of Range Tone

This tone sounds at 30-sec intervals from the transceiver when the transceiver is in the search
state, even if 10 sec elapse after the transceiver starts searching for a control channel in an NXDN
Trunking system or P25 Trunking system.

Call Request Tone

NXDN Trunking/ P25 Trunking system:

This tone sounds from the transceiver when the transceiver initiates an Individual Call or Group
Call by pressing the 

PTT

 switch.

NXDN Conventional system:

This tone sounds from the transceiver when the transceiver initiates an Individual Call (Individual
Call Acknowledge Request) by pressing the 

PTT

 switch.

OTAP Reactivation

Tone

This tone sounds from the transceiver when OTAP Reactivation completes.

Call In Progress Tone

This tone sounds from the transceiver if the transceiver initiates a Telephone Call, Individual Call
(Message Trunked (Enhanced)), or Group Call (Message Trunked (Enhanced)) and the
transceiver is available for communications.

Disconnect Indication

Tone

This tone sounds from the transceiver if the transceiver terminates communications with a
Telephone Call, Individual Call (Message Trunked (Enhanced)), or Group Call (Message Trunked
(Enhanced)).

Key Load Alert Tone

This tone sounds from the transceiver when Key Data is written to the Secure Cryptographic
Module (SCM) or when Key Data is deleted is from the SCM.

Transaction Confirmed

Tone

In a DMR Conventional system, this tone sounds from the transceiver when the transceiver detects
that no carrier is present after sending a Call Interrupt request message.

Bluetooth Find Device

Mode Tone

This tone sounds from the transceiver when Bluetooth Find Device is executed in Bluetooth Device
Mode and a Bluetooth-compatible device is searched.

Bluetooth Connect

Tone

This tone sounds from the transceiver when the transceiver successfully connects to a Bluetooth-
compatible device.

Bluetooth Disconnect

Tone

This tone sounds from the transceiver when the connection to a Bluetooth-compatible device is
disconnected.

Complete Tone

This tone sounds from the transceiver when the transmission successfully sends a Status
Message, Short Message, GPS data or Paging Call by operating the keys on the transceiver.

Record Stopped Tone This tone sounds from the transceiver when the transceiver exits Voice Memo Mode.

6 SOUND

6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed

Common FUNC (K, F)/Ver 2.20

108

CONTENTS

INDEX

Содержание NX-5800





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NX-5800

ABB Welcome User Manual preview
Welcome
Бренд: ABB Страницы: 58
ABB Welcome IP Manual preview
Welcome IP
Бренд: ABB Страницы: 191
Sven Royal 1 Operation Manual preview
Royal 1
Бренд: Sven Страницы: 12
Dahua Villa Setup Instruction preview
Villa
Бренд: Dahua Страницы: 22
La Gard 3750-K User Operating Instructions preview
3750-K
Бренд: La Gard Страницы: 2
Magnavox AZ8350 - Cd Radio Cass Recorder Operating Instructions Manual preview
AZ8350 - Cd Radio Cass Recorder
Бренд: Magnavox Страницы: 18
M&S Systems dmc1 Finish-Out Rough-In Instructions preview
dmc1 Finish-Out
Бренд: M&S Systems Страницы: 8
Lasonic i-931X User Manual preview
i-931X
Бренд: Lasonic Страницы: 28
Watts Dead Level Series Instructions For Installing preview
Dead Level Series
Бренд: Watts Страницы: 24
EAW KF850zF Specifications preview
KF850zF
Бренд: EAW Страницы: 4
vitapur VPS1140-1 Installation, Use & Care Manual preview
VPS1140-1
Бренд: vitapur Страницы: 36
Commax CM-200L User Manual preview
CM-200L
Бренд: Commax Страницы: 11
Garmin nuvi 140T Series Quick Start Manual preview
nuvi 140T Series
Бренд: Garmin Страницы: 8
NAIM CONNECTIONS Manual preview
CONNECTIONS
Бренд: NAIM Страницы: 31
Laskomex Bastion Draco Assembly And Operating Manual preview
Bastion Draco
Бренд: Laskomex Страницы: 12
Legacy LSWR7500 Quick Manual preview
LSWR7500
Бренд: Legacy Страницы: 4
Fermax evolution avisa User Manual preview
evolution avisa
Бренд: Fermax Страницы: 30
Lynx GXR-D15A User Manual preview
GXR-D15A
Бренд: Lynx Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды