Writing configuration data to multiple transceivers using Bluetooth communication
To write configuration data to multiple transceivers by using Bluetooth communication, click the “Multi Write (Bluetooth)”
button. A Bluetooth-compatible device (the transceiver) is detected in
Write Data to Multiple Transceiver (Bluetooth)
,
and the configuration data can be written to the transceiver by Bluetooth communication.
About the writing of configuration data in a Multi RF Deck/ Multi Control Head
structure
Configuring the FPU Data and Writing the FPU Data to Each RF Deck
” in “Multi RF Deck/ Multi Control Head” for
the writing of configuration data in a Multi RF Deck/ Multi Control Head structure for Mobile.
2.4
Reading the Configuration Data from the Transceiver
To change the data configured in the transceiver, read the configuration data from the transceiver to KPG-D1/ D1N, and
then write the configuration data to the transceiver after the configuration data has been changed.
Clicking the “Read” button in
Program
of KPG-D1/ D1N displays
Read Data from the Transceiver
. Clicking the “Read”
button of
Read Data from the Transceiver
enters FPU Programming Mode and starts reading the configuration data to
the transceiver.
Figure 2-3 Read Data from the Transceiver
2 GETTING STARTED
2.3 Writing the Configuration Data to the Transceiver
Common FUNC (K, F)/Ver 2.20
23
