About Notations
The following notations are used in this manual.
[ ]
The characters in [ ] indicate the name of the operating portion of the transceiver and the key of the PC.
“ ” (Double Quotation Mark)
The characters in “ ” indicate the name of the functions, buttons, and menus shown on the KPG-D1/ KPG-D1N or the display
of the transceiver.
Bold Letters
The characters in bold letters indicate the name of the windows, tabs, checkboxes in KPG-D1/ KPG-D1N and functions
assigned to keys on the transceiver.
[ ] + [ ]
This notation is used for describing functions activated by pressing 2 keys on the PC keyboard at the same time. For example,
the notation to enter a capitalized A on the PC is
[Shift]
+
[a]
for pressing the
[a]
key while pressing the
[Shift]
key.
PF (Programmable Function) Key
This function is used for describing the key that is assigned with any function. When the Reset function is assigned to the
[A]
key, the
[A]
key is described as the “
Reset
key”.
Notations for FPU names
KPG-D1 and KPG-D1N are referred to collectively as “KPG-D1/ D1N” in this document.
About the Notation of the Supported Models
This manual describes the supported models according to the following rules:
Model Name
Notation
NX-5200
Portable
VHF
NX-5300
UHF
NX-5400
700 MHz/ 800 MHz
NX-5700
Mobile
VHF
NX-5800
UHF
NX-5900
700 MHz/ 800 MHz
About Examples of the Transceiver Display
This manual describes mainly by using the display examples of Portable display if the functions are common to the
transceivers. The display examples of Mobile display are also described as needed. Also, the display examples of KCH-19
(Basic Panel) display are mainly used as the display examples for Mobile. The display examples of KCH-20R (Featured
Panel) are also used as needed.
About Notations
Common FUNC (K, F)/Ver 2.20
x
