![background image](http://html2.mh-extra.com/html/keithley/series-2200/series-2200_reference-manual_4054426096.webp)
Series 2200 Programmable DC Power Supplies Reference Manual
Section 4: Command reference
2200S-901-01 Rev. C / March 2016
4-39
TRIGger:SOURce
This command sets the source of trigger events.
Group
Trigger
Syntax
TRIGger:SOURce {MANual|IMMediate|EXTernal|BUS}
TRIGger:SOURce?
Related
Commands
(on page 4-12)
TRIGger[:IMMediate] (no query form)
Arguments
MANual
: When this value is sent, the power supply will wait for a
trigger from the front-panel. Press Shift + Trigger (3) to trigger the
power supply.
IMMediate
: When this value is sent, the power supply will wait for
a TRIgger:IMMediate bus command.
EXTerna
l: When this value is sent, the power supply can be
triggered with a TTL pulse applied to pin 1 of the terminal connector
in the rear. The pulse width should be at least 5 ms.
BUS
: When this value is sent, the power supply can be triggered by
sending a *TRG or
TRIgger:IMMediate
command to the power
supply.
Examples
TRIGGER:SOURCE BUS
*TST? (query only)
Initiates a self-test and reports any errors.
Group
Diagnostic
Syntax
*TST?
Returns
<NR1>
where:
<NR1>= 0
indicates that the self-test completed with no errors.
<NR1>
not equal to
0
indicates that the self test detected an error.
Self test code descriptions are described in
page C-11).