Keithley Series 2200, Справочное руководство, Страница: 60 / 160

Series 2200 Programmable DC Power Supplies Reference Manual Section 4: Command reference
2200S-901-01 Rev. C / March 2016 4-3
CONFigure:SOUNd[:STATe]
This command turns the key beep sound on or off.
Group
System
Syntax
CONFigure:SOUNd[:STATe] {0|1|ON|OFF}
CONFigure:SOUNd[:STATe]?
Arguments
0
or
OFF
turns the key beep sound off.
1
or
ON
turns the key beep sound on.
Returns
0|1
Examples
CONF:SOUN:OFF
CONF:SOUN?
might return 0, indicating the key beeper is turned off.
*ESE
Sets and queries the bits in the Event Status Enable Register
(ESER). The ESER is an eight-bit mask register that determines
which bits in the Standard Event Status Register (SESR) will set
the ESB bit in the Status Byte Register (SBR) See Appendix C,
Registers (on page C-3) for more information about registers.
Group
Status
Syntax
*ESE <mask>
*ESE?
Related
Commands
*CLS (no query form) (on page 4-2)
*ESR? (query only) (on page 4-4)
Arguments
<mask>::=<NR1>
where:
<NR1>
is a value in the range from 0 through 255. The binary bits
of the ESER are set according to this value.
The power-on default for ESER is
0
if *PSC is
1
. If *PSC is
0
, the
ESER maintains its value through a power cycle.
Examples
*ESE 145
sets the ESER to binary
10010001
, which enables the
PON, EXE, and OPC bits.
*ESE
might return the string
*ESE 186
, showing that the ESER
contains the binary value
10111010
.