Appendix C: Status model
Series 2200 Programmable DC Power Supplies Reference Manual
C-10
2200S-901-01 Rev. C / March 2016
Command errors
The following table shows the command error messages generated by improper syntax. Check that
the command is properly formed and that it follows the rules in the section on command Syntax.
Command error messages (CME bit 5)
Code
Message
101
Design error: Too many numeric suffices in Command Spec
110
No Input Command to parse
114
Numeric suffix is invalid value
116
Invalid value in numeric or channel list, e.g. out of range
117
Invalid number of dimensions in a channel list
120
Parameter of type Numeric Value overflowed its storage
130
Wrong units for parameter
140
Wrong type of parameter(s)
150
Wrong number of parameters
160
Unmatched quotation mark in parameters (single/double)
165
Unmatched bracket
170
Command keywords were not recognized
180
No entry in list to retrieve
190
Too many dimensions in entry to be returned in parameters
191
Too many char
Execution errors
The following table lists the execution errors that are detected during execution of a command.
Execution error messages (EXE bit 4)
Code
Message
-220
Execution error
-221
Settings conflict
-222
Data out of range
-223
Too much data
-224
Illegal parameter value
-225
Out of memory
–270
Macro error
–272
Macro execution error
–273
Illegal macro label
–276
Macro recursion error
–277
Macro redefinition not allowed