Keithley Series 2200, Справочное руководство

Страница: 80 / 160

Series 2200 Programmable DC Power Supplies Reference Manual Section 4: Command reference
2200S-901-01 Rev. C / March 2016 4-23
[SOURce:]VOLTage[:LEVel]
This command sets the voltage value of the power supply.
Group
Source
Syntax
[SOURce:]VOLTage[:LEVel] {<NRf>|MIN|MAX|DEF}
[SOURce:]VOLTage[:LEVel]?
Related
Commands
[SOURce:]CURRent[:LEVel] (on page 4-10)
Arguments
<voltage>
where:
<voltage>::=<NRf><units>
<NRf>
is a flexible decimal specifying the voltage setting, ranging
from 0 to the maximum nameplate voltage of the power supply.
<units>::={V|mV|kV}
MIN
sets the voltage to the minimum level (0 V).
MAX
sets the voltage to the maximum level (note that the maximum
level may be somewhat higher than the nameplate).
DEF
is the default level (1 V).
Returns
NR2
is the voltage setting in volts.
Examples
VOLTAGE:MIN
VOLTAGE?
might return
1.05
, which would be the voltage setting in
volts.