Section 7: Command reference
Model 2651A High Power System SourceMeter® Instrument Reference Manual
7-370
2651A-901-01 Rev. A / March 2011
Usage
table
= tspnet.tsp.rbtablecopy(
connectionID
,
name
)
table
= tspnet.tsp.rbtablecopy(
connectionID
,
name
,
startIndex
,
endIndex
)
table
A copy of the synchronous table or a string
connectionID
Integer value used as a handle for other tspnet commands
name
The full name of the reading buffer name and synchronous table to copy
startIndex
Integer start value
endIndex
Integer end value
Details
This function reads the data from a reading buffer on a remote instrument and returns an array of numbers or a
string representing the data. The
startIndex
and
endIndex
parameters specify the portion of the reading
buffer to read. If no index is specified, the entire buffer is copied.
The function will return a table if the table is an array of numbers; otherwise a comma delimited string is returned.
This command is limited to transferring 50,000 readings at a time.
Example
t = tspnet.tsp.rbtablecopy(testConnection,
"testRemotebuffername.readings", 1, 3)
print(t[1], t[2], t[3])
Copies the specified readings table for buffer
items 1 through 3, then displays the first three
readings. Sample output:
4.56534e-01
4.52675e-01
4.57535e-01
Also see
None
tspnet.tsp.runscript()
This function loads and runs a script on a remote instrument.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function Yes
Usage
tspnet.tsp.runscript(
connectionID
,
script
)
tspnet.tsp.runscript(
connectionID
,
name
,
script
)
connectionID
Integer value used as an identifier for other
tspnet
commands
name
The name that is assigned to the script
script
The body of the script as a string
Details
This function is appropriate only for TSP-enabled instruments.
This function downloads a script to a remote instrument and runs it. It automatically adds the appropriate
loadscript
and
endscript
commands around the script, captures any errors, and reads back any prompts.
No additional substitutions are done on the text.
The script is automatically loaded, compiled, and run.
