manualshive.com logo in svg

Kathrein UFS 913, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 913 Скачать руководство пользователя страница 48

48

On completion of a successful 

fi

 rst installation (TV picture can be seen) we recommend having 

the receiver search for any available software update. It is a prerequisite that you have selected 

(included in the selection) the satellite ASTRA 19.2° East in the 

fi

 rst installation. Press the 

 button 

to switch to the Main menu. Use the 



 buttons to select “Service Menu” and con

fi

 rm  by 

pressing the 

 button. Now use the 



 buttons to select “Software update” and con

fi

 rm 

again by pressing the 

 button. The receiver will now automatically start to search for new 

software. For information on the rest of the update process, please refer to the section “Service Menu”, 
“Software update” in these instructions.

During the set-up the following on-screen 
display appears (see screenshot on the 
right).

After a successful set-up the following 
on-screen display appears (see 
screenshot on the right).

Press the 

 button to con

fi

 rm and close 

the procedure.

In the “Recording Archive” line you will see how must hard disk storage volume is reserved for 
recordings. The capacity remaining for the recording archive is adjusted automatically depending 
on the storage volume assigned to the media centre and timeshift area (max. 15 Gigabytes). Use 

the 



 buttons to switch to the “Start set-up” line and con

fi

 rm by pressing the 

 button to start the 

process.

Connection and set-up

Tip!

Содержание UFS 913

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды