manualshive.com logo in svg

Kathrein UFS 913, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 913 Скачать руководство пользователя страница 40

40

Refer to the documentation supplied with your system for the settings for the 
SCRs, frequencies and any PIN assigned to the tuner. Here, you will fi nd a printed 
list showing the assignment between the various SCRs and the respective 
transmission frequencies. You may not be able to freely select the PIN for protection 
of individual frequencies; this also may be listed in the documentation for 
the OneCable components.

Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.

Do not assign the same frequencies/channels to Tuner 1 and Tuner 2.

The following on-screen display appears:

Secure channel with PIN:

If your OneCable system allows the transmission frequency to be protected by entering a PIN, this can be 
done in this menu. No other receiver can then use this transmission frequency unless the PIN is entered.

Select the setting “On”. You may then use the number pad to enter a PIN code (0-255) in the line underneath 
“Tuner 1 PIN code”.

Tuner 1:

Select a free available transmission 
channel (SCR 0 - SCR 7).

Tuner 1 SCR Frequency:

Select here one of the free available 
transmission frequencies or use the 
numeric pad to input the required 
frequency.

See example on the right (EXR 1581) 
assignment of a transmission channel to 
a transmission frequency.

Connection and set-up

Содержание UFS 913

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды