manualshive.com logo in svg

Kathrein UFS 913, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 913 Скачать руководство пользователя страница 4

4

Product return/original packaging

Make sure that the ventilation slots on the unit are not blocked or covered in any way. 
otherwise the unit may overheat. 

There is a risk of fi re!

You must not disconnect the receiver from the mains while it is in operation!
This can lead to a loss of data and corruption of the software.

Safety Instructions - Important Notes

Please keep the original packaging in case you need to return the product at any time. The receivers 
are fragile due to their construction and are only adequately protected by the original packaging. If the 
receiver is not shipped correctly the guarantee/warranty on it will be voided.

Before you disconnect the receiver from the mains, you must switch it to the standby mode by pressing 
the standby button (on/off) on the remote control. In standby mode, any changed or new data that 
are broadcast will be saved by the receiver. As soon as the receiver is in the standby mode, it can be 
disconnected from the mains at any time.

The information in these operating instructions was correct at the time of going to print. We reserve the 
right however to make changes at any time and without prior notice. If new software is released for your 
receiver, and this affects the information in the operating instructions (e.g. changes to the menus and/or 
functions), if we believe it necessary we will make available new operating instructions for download at 
“www.kathrein.de”.

Make a note of the receiver's basic settings (these are set during the 

fi

 rst installation), so you can restore 

them if necessary!

For compliance with the EMC Directives, the USB connection cable between the receiver and hard disk 
must not be longer than 50 cm.

Please be aware of your responsibility towards your fellow human beings! Keep this manual 
for any questions that arise later, and if the receiver passes to another owner, pass it on to the 
new owner.

Ventilation slots on the unit

Switching the receiver off

Miscellaneous

Warning!

Содержание UFS 913

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды