Kathrein UFS 913, Руководство по эксплуатации

Страница: 44 / 64

44
Channel Search Mode
Use the

buttons to select the type of channels you want to search for. You have three options:
- “free and scrambled” All channels are searched
- “only free” Only free channels are searched
- “only scrambled” Only scrambled channels are searched
To view scrambled channels you need an appropriate CA (Conditional Access) module and a
valid smart card together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the

buttons (On/Off) to select whether a network search should be performed. If you set the
network search to “Off”, only the factory stored transponders of the satellite(s) you previously selected
will be searched for new as yet unlisted channels. If you set the network scan to “On”, the transponder
network enables additional transponders that have not yet been stored to be located. They are then
stored and scanned for new channels in the same way as the existing transponders.
When you have completed all settings, press the

(green) button. The following on-screen displays appear
(example):
During the search you will see the following
on-screen display (example):
If new channels are found, these are
identi
fi ed by the suf fi x “NEW” (see
screenshot, right).
TV channels
found Radio channels
found
After completion of the search, you will
see the following on-screen display
(example):
Press the

button. The newly found
channels are added at the end of the
existing overall list.
Note:
You can cancel the search at any time by
pressing the

button.
Connection and set-up