Kathrein UFS 913, Руководство по эксплуатации

Страница: 36 / 64

36
The following on-screen display appears:
LNB Type (settings):
If your reception system does not have a
Universal LNB, use the

buttons to select
the LNB types that are used in your reception
system. You can choose from the following LNB
types:
- Universal or
- Simple or
- User-de fi ned
LNB Frequency (MHz):
You only need to specify this data if your LNB type is not “Universal”. The data required differ between the
settings “simple” and “User-de
fi ned”. On this aspect, also refer to the documentation supplied with your LNB.
- Selection “simple” LNB: Use the number pad to enter the LNB frequency
- Selection “User-de fi ned”: To enter the required low, high and limit frequencies press the

button. The entry is made using the number pad
DiSEqC™ Input:
Select the “DiSEqC™ Input” fi eld. Here set the “SatPos” for the satellite displayed on the screen, to match
the con fi guration of your reception system. You can choose between: “1/1”, “1/2” and “2/2” depending on
whether at “Satellite selection” you selected one or two satellites.
Test-Transponder:
Select the selection fi eld “Test-Transponder”. Here you can select a transponder for checking whether
your settings are correct using the signal strength bar and signal quality bar.
If no connection can be established to the OneCable system, check your settings (frequency and
transmission channel) and if necessary call for expert help.
When you have completed all settings for this satellite, press the

(green) button. The receiver will now
save these values for this satellite and skip automatically to the setting for the next satellite.
If you have selected more than one satellite for Tuner 1, the receiver will automatically skip to the settings
for the second satellite. Now de
fi ne the settings for the second satellite in the same way as described for
the fi rst satellite.
Once you have completed the settings for the satellites assigned, the receiver will automatically display the
screen for the channel search. Continue the
fi rst installation with the “Channel Search” section.
Connection and set-up