Kathrein UFS 913, Руководство по эксплуатации

Страница: 16 / 64

16
You can set up the tuner con fi guration for the following types of reception systems:
- DiSEqC™1.0
- DiSEqC™1.1
- Motorised antenna (DiSEqC™1.2/DiSEqC™1.3/USALS)
- LNB only or
- OneCable system
If your reception system is a OneCable system, go to the “OneCable System” option in this
section and continue from there.
Before you start con fi guring the tuner you must fi rst set both the “Tuner 2 Connection type” and
“Tuner 2 Signal Con fi guration” settings.
Tuner 2 Connection type
Select the connection type for Tuner 2 here. The currently selected setting is shown graphically in the
connection example at the top left of the screen. Either:
Separated:
The second tuner input of the receiver
(LNB2 IN) receives its own signal input
(i.e. there is a direct connection between
the antenna socket and tuner input 2).
See example illustration on the right.
Loopthrough:
The current signal received at the Tuner
1 loop-through output is looped through
to the second tuner input of the receiver
(LNB2 IN). In this case, the second
tuner can only receive the channel level
currently being received by the
fi rst tuner.
See example illustration on the right.
See also “Information about antenna
connection and loop-through mode” earlier
in this section.
Connection and set-up