Kathrein UFS 913, Руководство по эксплуатации

Страница: 32 / 64

32
LNB Type:
If your reception system does not have a Universal LNB, use the

buttons to select the LNB types
that are used in your reception system. You can choose from the following LNB types:
- Universal or
- Simple or
- User-de fi ned
LNB Frequency (MHz):
You only need to specify this data if your LNB type is not “Universal”. The data required differ between the
settings “simple” and “user-de
fi ned”. On this aspect, also refer to the documentation supplied with your LNB.
- Selection “simple” LNB: Use the number pad to enter the LNB frequency
- Selection “User-de fi ned”: To enter the required low, high and limit frequencies press the

button. The entry is made using the number pad
22 kHz control:
You only need to specify this data if your LNB type is “Simple”. The 22 kHz signal is needed to switch LNBs
when using multi-feed reception and to switch between Low and High band.
- On
- Off
Test-Transponder:
Select the selection fi eld “Test-Transponder”. Here you can select a transponder for checking whether
your settings are correct using the signal strength bar and signal quality bar.
When you have completed all settings for this satellite, press the

(green) button.
The receiver will automatically skip to the settings for the second tuner (assuming that for the second
tuner you selected the connection type “Separated” and set the signal con
fi guration to “Different from
Tuner 1”). If this is the case, now de fi ne the settings for the second tuner in the same way as you did for
the fi rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the
fi rst installation with the
“Channel Search” section.
Connection and set-up