Kathrein UFS 913, Руководство по эксплуатации

Страница: 17 / 64

17
Tuner 2 Signal Confi guration (only for “Separated” connection mode)
Select the signal con fi guration for tuner 2 here. The currently selected setting is shown graphically in the
connection example at the top left of the screen. Either:
Same with Tuner 1:
Both tuners are connected to the same
signal source. See example illustration on
the right.
Different from Tuner 1:
The two tuners are connected to different
signal sources (separate cables from the
LNB). See example illustration on the right.
The following con fi guration options are available for:
Tuner 2 connection type “Loopthrough”:
All settings are made on Tuner 1. The second tuner is fed from the looped through output of the fi rst tuner.
Tuner 2 connection type “Separated”/Tuner 2 signal confi guration “Same with Tuner 1”:
All settings are made on Tuner 1. The settings for the second tuner are automatically taken from the fi rst
tuner.
Tuner 2 connection type “Separated”/Tuner 2 signal confi guration “Different from tuner 1”:
All settings must be made separately for the two tuners.
Use the

buttons to set the parameters “Tuner 2 Connection type” and “Tuner 2 Signal Con fi guration”
appropriate to the setting for your reception system.
Continue as described in the fi rst installation for the type of reception you have selected.
Connection and set-up