manualshive.com logo in svg

Kathrein UFS 913, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 913 Скачать руководство пользователя страница 10

10

There are two ways you can access the digital audio.

HDMI

The stereo audio is transmitted to your TV set via the HDMI interface. If your TV set also supports Dolby 
Digital, you can also receive the Dolby Digital audio via the HDMI interface (providing it is broadcast by 
the channel provider). On this issue refer to the operating instructions for your TV set.

SPDIF Dolby Digital output (electrical/optical)

The SPDIF outputs are intended for the connection of a Dolby Digital system (see “Advanced connection 
example” in the technical appendix). Connect the SPDIF output (electrical or optical) to the Dolby Digital 
system using an appropriate cable.

If you want to play the sound on your hi-

fi

  system, connect the audio cinch sockets to the input sockets 

on the hi-

fi

  system, using an appropriate cable (see “Advanced connection example” in the technical 

appendix).

SPDIF = Sony Philips Digital Interface Format (digital output for Dolby Digital AC 3 audio)

Connect the satellite receiver (VCR/AUX Scart socket) to the video recorder/DVR using a Scart cable. 
To play back a DVD, i.e. output the signal from the PVR through the receiver on the TV set, the TV set 
must also be connected to the receiver with a Scart cable. This is necessary because the video signal from 
the VCR Scart socket of the receiver is not looped through/forwarded to the HDMI output of the receiver.

Audio connection

Digital

Analogue

If you are recording via an external video recorder/DVD, remember not to operate the receiver 
during recording, otherwise all the on-screen displays will appear on your recording.

During recording with a video/DVD recorder, no channel may be viewed other than the one being 
recorded. Only if the recording is on to a USB hard disk can any other channel be viewed.

If the receiver is started by means of a timer recording, there will be no picture on your TV set. 
Only when the standby button (On/Off) is pressed will a TV picture be visible or the receiver 
begin operation.

Connection and set-up

Connecting up the video/DVD recorder

Tip!

Содержание UFS 913

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды