Kathrein UFS 913, Руководство по эксплуатации

Страница: 41 / 64

41
Defi ne the settings for the second tuner in the same way as for the fi rst tuner.
When you have completed all settings, press the

(green) button.
The following on-screen display appears:
LNB Type (settings):
If your reception system does not have a
Universal LNB, use the

buttons
to select the LNB types that are used in
your reception system. You can choose
from the following LNB types:
- Universal or
- Simple or
- User-de fi ned
Connection and set-up
LNB Frequency (MHz):
You only need to specify this data if your
LNB type is not “Universal”. The data
required differ between the settings
“simple” and “User-de
fi ned”.
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.
- Selection “simple” LNB: Use the number pad to enter the LNB frequency
- Selection “User-de fi ned”: To enter the required low, high and limit frequencies press the

button. The entry is made using the number pad
DiSEqC™ Input:
Select the “DiSEqC™ Input” fi eld. Here set the “SatPos” for the satellite displayed on the screen, to match
the con fi guration of your reception system. You can choose between: “1/1”, “1/2” and “2/2” depending on
whether at “Satellite selection” you selected one or two satellites.
Test-Transponder:
Select the selection fi eld “Test-Transponder”. Here you can select a transponder for checking whether your
settings are correct using the signal strength bar and signal quality bar.
If a connection to the one cable system cannot be established, check your settings (frequency and
transmission channel) and if necessary call for expert help.
When you have completed all settings for this satellite, press the

(green) button. The receiver will now
save these values for this satellite and skip automatically to the setting for the next satellite.