Kathrein UFS 913, Руководство по эксплуатации

Страница: 30 / 64

30
Test-Transponder:
Select the selection fi eld “Test-Transponder”. Here you can select a transponder for checking the signal
strength bar and signal quality bar to see whether your settings are correct.
When you have completed all settings for this satellite, press the

(green) button. The receiver will now
save these values for this satellite and skip automatically to the setting for the next satellite.
If you have selected more than one satellite for Tuner 1, the receiver will automatically skip to the settings
for the second satellite. Now de
fi ne the settings for the second satellite, followed by the other selected
satellites, in the same way as described for the fi rst satellite.
Once all settings for all the satellites that you selected have been completed, the receiver will automatically
skip to the settings for the second tuner (assuming that for the second tuner you selected the connection
type “Separated” and set the signal con
fi guration to “Different from Tuner 1”). If this is the case, now de fi ne
the settings for the second tuner in the same way as you did for the fi rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the
fi rst installation with the
“Channel Search” section.
Connection and set-up