![background image](http://html1.mh-extra.com/html/karcher/wpd-100/wpd-100_manual_3512941019.webp)
English
19
몇
Warning
Health hazards on account of improperly
repaired appliance. The appliance may only
be repaired by trained and skilled person-
nel.
Before doing any work on the machine:
Set the appliance switch to "0".
Pull out the mains plug.
Shut off water supply.
1 “Ready for use” indicator lamp
2 Indicator lamp - fault
*Changing display
Troubleshooting
Indicator lamps
Faults / display
Possible cause
Remedy
Control lamp "Ready" is off, control
lamp "Error" is illuminated
Temperature sensor for "hot
water" defective.
Turn off the appliance, wait briefly, turn on the appliance once
again.
If the fault persists, contact customer service.
Water leaking inside appli-
ance.
Heater defective.
Out of order - hygeniazation fault*
Hygienising procedure unsuc-
cessful.
Start the hygienising process manually (see "Setting the start
time of the hygienising" in the operating instructions). If the
fault persists, contact customer service.
Operational - filter change UF*
Hy Protect filter used.
Call service
Operational - filter change AC*
Active pure filter used.
Call service
Sensor fault HW
Call service
Sensor fault KW
Call service
Out of order - water inrush fault*
Call service
Out of order - heating fault*
Call service
Out of order - button fault*
The button was used too fre-
quently in too short a time.
Turn off the appliance, wait briefly, turn on the appliance once
again.
Button defective.
Turn off the appliance, wait briefly, turn on the appliance once
again.
If the fault persists, contact customer service.
Appliance does not dispense water,
but shows "ready".
Water supply interrupted.
Ensure adequate water supply, check locking devices.
If the fault persists, contact customer service.
Appliance is not working / no display
showing
Voltage supply is interrupted.
Insert the mains plug into the socket.
The appliance is switched off. Set the appliance switch to "I".
Blown fuse.
Pull out the fuse holder next to the power switch, replace fuse
with fuse of same rating.
Appliance does not dispense water,
display shows "Power save"
The appliance is in energy
saving mode due to the set
operating times.
Adapting the operating times (see "Setting operating times" in
the operating instructions).
Display shows „Service operation“
The appliance is in its (auto-
matically triggered) hygienisa-
tion phase.
Wait until the process is completed and the appliance prompts
you to rinse (will take max. 1 hour).
Содержание WPD 100
