Kärcher WPD 100, Руководство пользователя

Страница: 16 / 276

16
English
1 Button for hot water *
2 Button for untempered water
3 Button for cooled water
4 Power switch
* Not visible on the operating panel with ap-
pliances without hot water dispensing, but
still functionable in the operator's menu.
 Set the appliance switch to "0".
 wait for approx. 5 seconds
 Switch the WPD 100 on via the device
switch and press the sensor button to
request cold water within two seconds
(as soon as the display has a blue back-
light). The display switches to the user
menu.
– Button for hot water: Forward
– Button for untempered water: Reverse
– Button for cooled water: SET
 Open the operator menu (see "operator
menu").
 After the display "Time/Date" appears,
select the value to be changed with the
button for cooled water.
 Set the selected value with the buttons
for untempered and hot water.
 Select the next value with the button for
cooled water and set it with the keys for
untempered and hot water.
 If the menu item "Operating times" is
reached, forward to the end of the oper-
ator menu using the button for hot water
repeatedly.
When the appliance is not operated, it is in
the "power save" mode. No water will be
dispensed while the appliance is in "power
save" mode.
 Open the operator menu (see "operator
menu").
 Press the button for hot water.
The display shows "Operating times".
 Press the button for cooled water.
 Search for the tag to be set using the
buttons for untempered and hot water.
1 = Monday...7 = Sunday.
 Activate the time adjustment by press-
ing the button for cooled water.
 Select the value to be set with the but-
ton for cooled water and set it with the
keys for untempered and hot water.
 If the menu item "Disinfection" is
reached, forward to the end of the oper-
ator menu using the button for hot water
repeatedly.
 Open the operator menu (see "operator
menu").
 Press the button for hot water twice.
 Press the button for cooled water to set
the start time.
 Select the value to be set with the but-
ton for cooled water and set it with the
keys for untempered and hot water.
 Activate the time adjustment by press-
ing the button for cooled water.
 Press the button for cooled water to set
the start day.
 Select the start day using the buttons for
untempered and hot water.
1 = Monday...7 = Sunday.
 Activate the selected start day by press-
ing the button for cooled water.
 Press the button for hot water to skip the
setting "Disinfection Clerance".
Note
The hygienisation takes place automatically
in regular intervals. An extension of the in-
terval set up after consulting the customer
for the initial startup is not permitted without
the express written approval by KÄRCHER.
During the hygienising process, the display
shows the condition "Service operat." as
well as the current temperatures. This tem-
perature display is only of importance to the
KÄRCHER service department.
 Press the button for hot water to skip the
manual start of the hygienising process.
or
A manual start of the hygienising is required
after the initial startup, after the appliance
has been out of service for more than 4
days or after the filter is changed.
 Press the button for cold water to skip
the hygienising process.
 Press the button for hot water to change
the display "No" to "Yes".
 Press the button for cold water to start
the hygienising process.
Note
A manual start of the hygienisation is only
required if an additional hygienisation is
necessary.
The hygienisation process lasts approx. 1
hour. During this time, no water can be dis-
pensed from the appliance.
After every hygenising procedure, the de-
vice prompts you to rinse: The message
"Flush Menu Start" appears on the display.
 Place the collection trough under the
water drain.
 To start the rinse process, press the
button for cooled water for 5 seconds.
The display shows: Rinse programme re-
maining time xxx sec“.
 If the collecting trough is full, press the
button "cooled water" to end the dis-
pensing of water.
 Empty the collection and place it under
the water drain.
 Press the button "cooled water" again to
continue the rinsing cycle. Once the col-
lecting trough is full again, repeat this
procedure until the remaining time has
elapsed.
The appliance is initialised automatically
and is ready to operate at that point.
1 Drip pan
2 Lock
3 Device door

Danger
Risk of electric shock!
First remove the mains plug before doing
any job on the device.

Remove the drip pan.
 Unlock the lock.
 Open device door.
Open operator menu
Button assignment in the operator menu
Set time/date
1 2 3
4
Setting the operating times
Setting the start time for hygienisa-
tion
Manual hygienising
Rinsing after hygienising
Opening the device