K&R GT600-4T132G, Руководство пользователя, Страница: 341 / 362

Appendix B Parameter Table
12
- 340 -
Para. No. Para. Name Setting Range Default Property Page
F8-12 Forward/Reverse run switchover
dead-zone time 0.0s to 3000.0s 0.0s
☆
F8-13 Reverse RUN selection 0, 1 0
☆
F8-14 Running mode when frequency
reference lower than frequency
lower limit 0 to 2 0
☆
F8-15 Droop rate 0.00% to 100.00% 0.00%
☆
F8-16 Accumulative power-on time
threshold 0 to 65000 h 0 h
☆
-
F8-17 Accumulative running time
threshold 0 to 65000 h 0 h
☆
-
F8-18 Startup protection selection 0, 1 0
☆
-
F8-19 Frequency detection value 1 0.00 Hz to max. frequency 50.00 Hz
☆
F8-20 Frequency detection hysteresis 1 0.0% to 100.0% 5.0%
☆
F8-21 Detection width of target
frequency reached 0.0% to 100.0% 0.0%
☆
F8-22 Jump frequency function 0, 1 0
☆
F8-25 Switchover frequency of accel
time 1 and accel time 2 0.00 Hz to max. frequency 0.00 Hz
☆
F8-26 Switchover frequency of decel
time 1 and decel time 2 0.00 Hz to max. frequency 0.00 Hz
☆
F8-27 Set highest priority to terminal
JOG function 0, 1 0
☆
F8-28 Frequency detection value 2 0.00 Hz to max. frequency 50.00 Hz
☆
F8-29 Frequency detection hysteresis 2 0.0% to 100.0% 5.0%
☆
F8-30 Detection of frequency 1 0.00 Hz to max. frequency 50.00 Hz
☆
F8-31 Detection width of frequency 1 0.0% to 100.0% (max.
frequency)
0.0%
☆
F8-32 Detection of frequency 2 0.00 Hz to max. frequency 50.00 Hz
☆
F8-33 Detection width of frequency 2 0.0% to 100.0% (max.
frequency)
0.0%
☆
F8-34 Zero current detection level 0.0% to 300.0% (rated motor
current) 5.0%
☆
F8-35 Zero current detection delay 0.01s to 600.00s 0.10s
☆
F8-36 Output overcurrent threshold
0.0
% (no detection)
0.1
% to 300.0% (rated motor
current)
200.0%
☆
F8-37 Output overcurrent detection
delay 0.00s to 600.00s 0.00s
☆
F8-38 Detection level of current 1 0.0% to 300.0% (rated motor
current) 100.0%
☆
F8-39 Detection width of current 1 0.0% to 300.0% (rated motor
current) 0.0%
☆
F8-40 Detection level of current 2 0.0% to 300.0% (rated motor
current) 100.0%
☆