K&R GT600-4T132G, Руководство пользователя, Страница: 265 / 362

8. Peripherals and Options
Type Terminal Terminal Name Function Description Terminal Arrangement
PROFIBUS
communication
terminal (J2)
1, 2, 7, 9 NC Vacant internally
1
NC
6
+5V
2
NC
7 NC
3
Data line B
8
Data line A
4
RTS
9
NC
5
GND
3 Data line B Data line positive
4 RTS Request of sending
signal
5 GND Isolation 5 V power
ground
6 +5V Isolation 5 V power
supply
8 Data line A Data line negative
CANlink
communication
terminals (J3,
J9)
CANH
CAN positive
input
Data line positive -
CANL CAN negative
input Data line negative
GND Power ground Isolation 5 V power
ground
8
■
Extension PROFIBUS-DP Card (GT60DP2)
GT60DP2, complying with international PROFIBUS field bus standard, is designed to
connect the drive to PROFIBUS-DP bus. This card can improve communication efficiency
and implement AC drive networking function. It enables the drive to be a slave in the bus,
controller by the master.
Besides PROFIBUS-DP communication, GT60DP2 provides CANlink communication
interface.
Table 8-15 Terminal descriptions of GT60DP2
Table 8-16 Jumper descriptions of GT60DP2
- 263 -
SW1
J9
S1
D2 D3 D4
J2
J3
J6
ON
1 2 3 4 5 6 7 8
GND CANH CANL GND
Jumper Description Meaning Setting
J6 CANlink terminal resistor
matching selection Matching the terminal resistor
Not matching the terminal resistor