K&R GT600-4T132G, Руководство пользователя, Страница: 177 / 362

6. Description of Parameters
- 175 -
Function Code Parameter Name Setting Description
Any of F4-00 to F4-09 DIx function selection 25 Counter input
Any of F4-00 to F4-09 DIx function selection 26 Counting reset
Any of F5-00 to F5-05 DOx function selection 8 Set counting value reached
Any of F5-00 to F5-05 DOx function selection 9 Designated counting value reached
Fb-09 = 20
U0-12 = 20
Output of designated
count value reached
Fb-08 = 11
U0-12 = 11
Output of set count
value reached
Count reset input
U0-12 = 0
1 2 19 20 21 10 11 12 1 2 3
U0-12 (Count value)
Count pulse input
Allocate DO with the
Any of F5-00
designated count value
to F5-05 = 8
reached function.
Allocate DIx with the
counter reset function.
Any of F4-04
to F4-09 =26
DIx
Reset
DO outputs the
designated count
value reached signal.
≥
Clear to 0
Reset
U0-12
Count value
DIx
DO outputs the set count
value reached signal.
Compare
≥
Any of F4-04 Allocate DIx with the
to F4-09 = 25 counter input function.
Allocate DO with the set
count value reached function.
Any of F5-00
to F5-05 = 8
Fb-09
Designated
count value
DO
DO
Fb-08
Set count value
6
●
For high pulse frequency, use terminal DI5.
●
You cannot allocate "Set counting value reached" function and "Designated
counting value reached" function to the same DO terminal.
●
The counter keeps counting in the drive running/stop status. It stops counting
until the set counting value is reached.
●
The counting value is retentive at power down.
●
An automatic stop system can be implementing by connecting the output
counting value reached signal of DO to the stop input terminal.
Figure 6-51 Counting function
The settings of related function parameters in the preceding figure are as follows:
Note