KAESER M100 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 384

KAESER M100 Скачать руководство пользователя страница 52

Inhalation

Fuel and oil vapors impair breathing.
➤ Clear the respiratory tract from fuel or oil vapor.
➤ Seek medical help if difficulty with respiration continues.

Ingestion

➤ Wash out the mouth immediately.
➤ Do not induce vomiting.
➤ Seek medical aid.

3.11 Warranty

This operator manual contains no independent warranty commitment. Our general terms and con‐

ditions of business apply with regard to warranty.
A condition of our warranty is that the machine is used for the purpose for which it is intended un‐

der the conditions specified.

Due to the multitude applications for which the machine is suitable the obligation lies with the user

to determine its suitability for his specific application.

In addition, we accept no warranty obligation for:
■ the use of unsuitable parts or operating materials,
■ unauthorized modifications,
■ incorrect maintenance,
■ incorrect repair.

Correct maintenance and repair includes the use of original spare parts and operating materials.
➤ Obtain confirmation from KAESER that your specific operating conditions are suitable.

3.11.1 Noise emissions warranty

The manufacturer warrants to the ultimate purchaser and each subsequent purchaser that this air

compressor was designed, built, and equipped to conform, at the time of sale to the first retail pur‐

chaser, with all applicable American EPA noise control regulations.
This warranty is not limited to any particular part, component, or system of the air compressor.
Defects in the design, assembly, or in any part, component, or system of the compressor which, at

the time of sale to the first retail purchaser, caused noise emissions to exceed Federal standards

are covered by this warranty for the life of the air compressor.

3.12 Identifying the effects of improper modifications

The machine and various modules are designed according to applicable regulations and are sub‐

mitted for approval procedures by the relevant authorities (where applicable).

Concerned modules include:
■ Compressor drive motor
■ Fuel supply
■ Exhaust system

3

Safety and Responsibility

3.11 Warranty

40

Operator Manual Screw Compressor
M100

No.: 9_6999 23 USE

«
...
50
51
52
53
54
...
»

Содержание M100

































































































































































































































































































































































































Отзывы:

Нет отзывов