Juniper QFX10016, Руководство по оборудованию

Страница: 63 / 439

Table 14: Power Input and Output Voltages for JNP10K-PWR-AC2 Power Supplies
INP0 (Switch 1) INP1 (Switch 2) H/L (High Input 30 A/Low Input 20A) Output Power
On On On (30 A) 5500 W
On On Off (20 A) 3000 W
On Off On (30 A) 5000 W
Off On On (30 A) 5000 W
On Off Off (20 A) 2700 W
Off On Off (20 A) 2700 W
CAUTION: It is important to connect both input feeds of the JNP10K-PWR-AC2 power
supply to AC mains before loading the system with power.
The JNP10K-PWR-AC2 requires the enhanced power bus to operate at full power. You can use the
standard bus, but available power is 3000 W for power budget from the power management software.
To determine whether your system has the standard power bus or the enhanced power bus, see
QFX10000 Status Panel .
JNP10K-PWR-AC2 Power Specifications
The JNP10K-PWR-AC2 power supply supports AC, HVAC, and HVDC.
Table 15 on page 52 lists the power specifications for the JNP10K-PWR-AC power supply.
Table 15: Power Specifications for a JNP10K-PWR-AC2 Power Supply
Item Specifications
AC input voltage 180–305 VAC
52