Juniper QFX10016, Руководство по оборудованию

Страница: 131 / 439

The QFX10K-12C-DWDM line card is the combination of Juniper Networks Junos OS for QFX10000
modular chassis software running on Juniper Networks JNP10K-LC1104 hardware. The
QFX10000-12C-DWDM line card provides up to 1.2 Tbps packet forwarding for cloud providers,
service providers, and enterprises that need coherent dense wavelength-division multiplexing (DWDM)
with MACsec security features. The 6 port line card, with built-in optics, supports flexible rate
modulation at 100 Gbps, 150 Gbps, and 200 Gbps speeds.
The QFX10K-12C-DWDM line card is supported on Junos OS Release 17.2R1 and later.
This topic includes:
Hardware Features
The line cards in QFX10000 modular switches combine a Packet Forwarding Engine and Ethernet
interfaces in a single assembly. Line cards are field-replaceable units (FRUs) that can be installed in the
line card slots on the front of the switch chassis. The line cards are hot-insertable and hot-removable;
you can remove and replace them without powering off the switch or disrupting switch functions. See
Figure 64 on page 120 .
Figure 64: QFX10000-6C-DWDM Port Panel
1
—
Power and status LEDs 3
—
Ports with embedded optics
2
—
Network link and Ethernet link LEDs
Each QFX10K-12C-DWDM has 6 physical interfaces (OT) that connect to one of three built-in flexible
rate optical transponders. Each transponder connects four 100-Gigabit Ethernet logical interfaces (ET)
120