Juniper QFX10016, Руководство по оборудованию

Страница: 391 / 439

5. Move the wooden pallet and packing material to a staging area as close to the switch as possible.
Make sure there is enough space to move the chassis from the rack to the wooden pallet.
6. Position a mechanical lift under the device. If a mechanical lift is not available, have three people
support the weight of the switch while another person uses the screwdriver to remove the front
mounting screws that attach the chassis mounting brackets to the rack. For QFX10008 removal,
see
Removing a QFX10008 From a 4-Post Rack Using a Mechanical Lift
or
Manually Removing a
QFX10008 from a 4-Post Rack
. For QFX10016 removal, see "Removing a QFX10016 From a 4-
Post Rack Using a Mechanical Lift" on page 352 .
7. Remove the switch from the rack (see
Installation Instructions Warning
) and place the switch on the
shipping pallet. Position the switch on the pallet so that the front of the switch is facing the
silkscreened “front” mark on the pallet. The pallet also has crop marks to guide you in positioning
the chassis
8. Use the 13/32-in. or 10-mm open-end or socket wrench to install the four sets of brackets and
bolts that secure the chassis to the wooden pallet.
9. Slide the plastic cover over the switch chassis. The plastic cover is part of the switch’s original
packing materials.
10. Place the packing foam on top of and around the switch.
11. Place the power cords in the box.
12. Remove the adjustable mounting brackets from the rack and place them and their connecting
screws in the accessory box.
13. If you are returning accessories or FRUs with the switch, pack them as instructed in "Packing
QFX10000 Switch Components for Shipping" on page 382 .
14. Verify that all accessories are present. See
Comparing the QFX10000 Order to the Packing List
.
15. Slide the cardboard box over the chassis, making sure that the arrows on the box point up and the
pallet fasteners to secure the cardboard box to the wooden pallet are near the bottom.
380