Juniper QFX10016, Руководство по оборудованию

Страница: 229 / 439

NOTE: Mount your switch in the rack before attaching the grounding lug to the switch. For the
QFX10008, see
Mounting a QFX10008 in a 4-Post Rack Using a Mechanical Lift
or
Manually
Mounting a QFX10008 in a 4-Post Rack .
For the QFX10016, see "Mounting a QFX10016 in a Four-Post Rack Using a Mechanical Lift" on
page 207 .
Ensure that you have the following parts and tools available:
• An electrostatic discharge (ESD) grounding strap (provided).
• Protective earthing terminal lug (provided).
• Grounding cable for your chassis (not provided)—The grounding cable must be 6 AWG (13.3 mm²),
minimum 90° C wire, or as permitted by the local code.
• Grounding lug for your grounding cable (provided)—This bracket attaches to the lower left corner of
the chassis next to PSU 5 on the QFX10008 and PSU 9 on the QFX10016. The grounding lug
required is a Panduit LCD6-10A-L or equivalent.
• A Phillips screwdriver to tighten the two screws that are mounted on the chassis (not provided).
An AC-powered QFX modular chassis gains additional grounding when you plug the power supply in the
switch into a grounded AC power outlet by using an AC power cord appropriate for your geographical
location.
To connect earth ground to a QFX10008 or QFX10016 chassis:
1. Verify that a licensed electrician has attached the cable lug (provided in the accessory kit) to the
grounding cable.
2. Connect the other end of the grounding cable to a proper earth ground, such as the rack in which the
switch is mounted.
218