Juniper QFX10016, Руководство по оборудованию

Страница: 370 / 439

Table 83: Chassis Component Alarm Conditions on QFX10000 Modular Models
(Continued)
Chassis
Component Alarm Condition Alarm
Severity Remedy
One of the fan tray controller in
the chassis is not receiving
enough power. Major (red) Check the power supply.
Switch Interface
Boards (SIBs) One of the SIB has failed. Minor
(yellow) Check the below:
•
The SIB is not receiving power.
•
The fan tray controller is having a
power problem.
SATA SSD slot The SSD has failed or removed. Major (red) Install the SSD.
Ethernet The Ethernet management
interface on the Control board
is down. Minor
(yellow)
•
Check the interface cable connection.
•
Reboot the system.
•
If the alarm recurs, open a support
case using the Case Manager link at
https://www.juniper.net/support/ or
call 1-888-314-5822 (toll free, US &
Canada) or 1-408-745-9500 (from
outside the United States).
Hot swapping Too many hot-swap interrupts
are occurring. Major (red) Replace the failed components.
Power supplies A power supply has been
removed from the chassis. Minor
(yellow) Install a power supply in the empty slot.
A power supply has a high
temperature. Major (red) Replace the failed power supply.
A power supply input has failed. Major (red) Check power supply input connection
and the power cord.
359