Juniper NSM4000, Руководство по оборудованию

Страница: 64 / 196

Before you begin:
•
Connect the NSM4000 appliance to a management console. Refer to “Connecting an
NSM4000 Appliance to a Management Console” on page 39 for more information.
• Configure a console terminal or terminal emulation utility to use the following serial
connection parameters:
•
Baud rate: 9600 bits per second
•
Data: 8 bits
• Flow control: None
• Parity: None
•
Stop bits: 1
•
Ensure that the appliance is booted and the console displays the login prompt.
To power off the appliance using the management console:
1.
At the console login prompt, enter the
sudo su-
command to log in to the appliance
as the root user.
2.
Enter the admin password.
3.
Enter the following commands to perform the specified tasks:
• Enter the reboot command to reboot the NSM4000 appliance.
• Enter the shutdown -h now command to shut down the NSM4000 appliance.
The appliance displays output messages on the management console and then powers
off. When the appliance is powered off, the green Power LED on the front panel of the
appliance goes out; in addition, the Power Supply Module LED turns amber.
Powering Off Using the WebUI
For information on how to power off the NSM4000 appliance using the WebUI, see
“Rebooting or Shutting Down the NSM4000 Appliance” in
“Managing System
Administration” on page 68 .
Powering Off Using the Appliance Power Switch
To power off the NSM4000 appliance using the appliance power switch:
1.
Locate the appliance power switch on the back panel of the appliance chassis.
2.
Press the power switch and release it.
The appliance displays output messages on the management console and then
powers off.
Copyright © 2016, Juniper Networks, Inc. 50
NSM4000 Appliance Hardware Guide