Juniper NSM4000, Руководство по оборудованию

Страница: 62 / 196

If you configure HA with just one heartbeat link, then device management traffic and
data replication traffic both use that link. If you configure two links, device management
traffic uses the first link and data replication uses the second.
If the HA link count is set to 1, the only options available are to set the HA link count
and to return to the High Availability menu. If the HA link count is set to 2, all options
are available.
• Menu: HA Advanced Settings—Enter 8 to open a menu to configure HA advanced
settings. For more information on options available to you for custom settings, refer
to the
Network and Security Manager Installation Guide .
Configuring Advanced Options
The Advanced Options menu provides the following configuration options:
You have the following options:
•
https port for NBI service—Enter
1
to change the port number for listening for messages
for the NSM API. In response to the prompt, enter a value in the range 1025 through
65535. Any number outside this range returns an error message. The default value is
8443.
• Menu: Remote Replication of Database—Enter 2 to display a menu of options for
configuring the time of day to take the backup, the location of the backup, and the
timeout value.
•
Menu: SRS—Enter
3
to open a menu to configure the statistical report server (SRS).
The following sections provide details about configuring remote backup and SRS:
•
Enabling and Configuring Remote Replication of the Database on page 48
•
Enabling and Configuring the Statistical Report Server on page 49
Enabling and Configuring Remote Replication of the Database
On the Advanced Options menu, enter 2 to open a menu that allows you to mirror the
daily backup to an external server. You can toggle it on or off. After you turn it on, use the
menu options to configure this option.:
The screen always shows the current status of the remote backup database. If no status
exists, the option has not yet been configured.
• Remote Replication of Database—Enter 1 to turn remote replication on or off. At the
next prompt, enter y to change the state.
• Hour of day to Replicate Database—Enter 2 to start the backup at the specified time.
The valid range is 00-23.
•
Remote Backup IP—Enter
3
to specify the IP address of the remote backup machine.
Backup information is copied to the
/var/netscreen/dbbackup
directory on the remote
Copyright © 2016, Juniper Networks, Inc. 48
NSM4000 Appliance Hardware Guide