Juniper NSM4000, Руководство по оборудованию

Страница: 86 / 196

Figure 32: Add RADIUS Server Dialog Box
3.
Configure the following parameters in the Add RADIUS Server dialog box:
a.
Name: The name of the user to be authenticated by the RADIUS server
b.
Server address: The IP address or the hostname of the RADIUS server.
c.
Shared secret: The shared secret the NSM4000 appliance and the RADIUS server
use for secure authentication.
d.
Auth Port: The RADIUS authentication software port. (We recommend UDP port
1812.)
e.
Acct Port: The RADIUS accounting software port. (We recommend UDP port 1813.)
f.
Disconnect/CoA port: The change of authorization or disconnect port.
g.
Timeout (sec): Automatic timeout in second(s) of the RADIUS access request,
after which the request is retransmitted, if applicable. Enter a value between 1 and
10 seconds.
h.
Retries: The number of times the RADIUS access request must be retransmitted
for RADIUS authentication. Enter a value between 1 and 5.
4.
Click Add. The RADIUS Servers dialog box appears with the RADIUS server you added
listed.
Changing the Priority of RADIUS Servers
To change the priority of RADIUS servers:
1.
Select
System Administration
>
RADIUS Management
. The RADIUS Servers dialog box
appears listing the RADIUS Servers that have been added.
2.
To increase the priority of a RADIUS server, select the check box next to the name of
the server whose priority you want to increase, and click
Move Up
.
To decrease the priority of a RADIUS server, select the check box next to the name of
the server whose priority you want to decrease, and click
Move Down .
Copyright © 2016, Juniper Networks, Inc. 72
NSM4000 Appliance Hardware Guide