Juniper NSM4000, Руководство по оборудованию

Страница: 63 / 196

server. The nsm user must exist on both servers and you must establish an SSH trust
relationship. See the
Network and Security Manager Installation Guide for details.
• Remote Replication Timeout—Enter 4 to time out the remote backup. The valid range
is 1-65535 seconds.
Enabling and Configuring the Statistical Report Server
The following options are available for configuring the SRS:
NOTE: The SRS must be installed on a separate server from NSM.
You have the following options:
•
SRS—Enter
1
to turn the SRS on or off. At the next prompt, enter
y
to turn it on or
n
to
turn it off. If you turn it on, the SRS will be used with the GUI server.
• SRS DB IP—Enter 2 to specify the IP address for the server on which you have installed
the SRS database server.
• SRS DB Type—Enter 3 to specify the database type. The options are pgsql (default),
oracle, and mssql.
•
SRS Database Name—Enter
4
to specify the name of the SRS database on the SRS
server. The default value for this option is netscreen.
•
SRS DB Owner Name—Enter
5
to specify the name of the SRS database owner. The
default value for this option is netscreen.
• SRS DB Owner Password—Enter 6 to specify the owner password for the SRS database.
At least eight characters are required. The password is case-sensitive.
Related
Documentation
Navigating the Menus on page 55
•
•
Configuring Standard Configuration Options on page 56
•
NSM4000 Appliance Ports on page 52
Powering Off the NSM4000 Appliance
The three ways to power off an NSM4000 appliance are:
•
Powering Off Using the Management Console on page 49
• Powering Off Using the WebUI on page 50
• Powering Off Using the Appliance Power Switch on page 50
Powering Off Using the Management Console
You can power off the NSM4000 appliance from the NSM CLI by using the management
console.
49 Copyright © 2016, Juniper Networks, Inc.
Chapter 7: Performing Initial Configuration