Juniper NSM4000, Руководство по оборудованию

Страница: 70 / 196

To select an option, enter the number at the prompt and then press
Enter
. The following
options are available on most menus:
•
Numbered Options — Enter setting options by number ( 1 , 2 , and so on) to access
individual parameters or open menus.
• Apply settings — Enter A to apply and save any modifications you have made and take
you out of the setup program.
•
Cancel all changes and quit — Enter C to leave the setup program without saving any
changes you made since you last saved.
• Redraw menu — Enter R to redraw the screen text.
• Main Menu/Return to Main Menu — Enter M to return to the main menu. This option is
last on most menus.
•
Quit — Enter Q to exit from the setup program. You will be prompted to save or cancel
any changes you made since you last saved:
Q> Quit
R> Redraw menu
Choice [1–9,Q,R]: Q
Related
Documentation
Setting Up Your NSM4000 Appliance on page 42
•
•
Configuring a Regional Server on page 45
•
Configuring Standard Configuration Options on page 56
Configuring Standard Configuration Options
After the initial setup, continue configuring typical options, including the following tasks.
Follow the setup prompts on the main menu to set or modify these options. Your
configuration options (with the exception of any password changes) will not take effect
until you apply the changes.
Run nsm_setup to access these options on the NSM4000 appliance settings menu:
• Changing the Password on page 57
•
Setting Interface Options on page 57
•
Setting Routing Options on page 58
• Changing the NSM4000 Appliance Hostname on page 58
• Adding DNS Servers on page 58
•
Setting the System Time on page 59
•
Forwarding Local Status E-Mails on page 59
• Updating System Security on page 60
• Configuring Extended HA on page 60
•
Saving Setup Options on page 60
Copyright © 2016, Juniper Networks, Inc. 56
NSM4000 Appliance Hardware Guide