Juniper NSM4000, Руководство по оборудованию, Страница: 73 / 196

Setting the System Time
You can change time zones or the Network Time Protocol (NTP) configuration. The
default time zone is set for Pacific Standard Time (PST)/Pacific Daylight Time (PDT).
Select time zones in the following order:
• Continent or ocean
• Country
•
Region
NOTE: NTP is disabled by default. We recommend that you enable this option
to ensure that the time is always accurate.
To change time options:
1.
On the NSM4000 appliance Settings menu, enter 6 at the prompt.
2.
Enter 1 to change the time zone.
Follow the prompts to find the time zone you want based on the options listed earlier.
The final selection returns you to the NSM4000 appliance Settings menu.
3.
Enter 2 to set NTP servers.
NTP servers automatically set the system clock based on external time sources.
4.
Enter one of the following values at the prompt:
• 1 to enable or disable NTP.
• 2 to add an NTP server.
The remaining numbered options allow you to remove an NTP server from the list.
5.
Follow the prompts to enable, set, or delete the NTP servers and return to the
NSM4000 appliance Settings menu.
Forwarding Local Status E-Mails
You can use this option to forward all local root e-mail messages to an e-mail address.
You can add an unlimited number of e-mail addresses in addition to mailing lists to help
manage large numbers of recipients.
To set the Forward Local Status:
1.
On the NSM4000 appliance Settings menu, enter 7 at the prompt.
2.
Enter 1 to add or change the recipient.
3.
Enter 2 to remove the recipient.
59 Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Configuring NSM from the CLI