Juniper NSM4000, Руководство по оборудованию

Страница: 72 / 196

•
2 for 100 Mbps and go to the next step
• 3 for 1000 Mbps and go to the next step
6.
Enter 1 for full duplex or 2 for half duplex, and then return to the NSM4000 appliance
Settings menu.
Setting Routing Options
To set or modify routing options:
1.
On the NSM4000 appliance Settings menu, enter 3 at the prompt.
2.
Enter one of the following options:
• 1 to change default gateway options.
Follow the prompts to change the IP address of the default gateway and return to
the NSM4000 appliance Settings menu.
•
2 to change the static routing options.
Follow the prompts to add a new static route and return to the NSM4000 appliance
Settings menu.
Changing the NSM4000 Appliance Hostname
To change the hostname:
1.
On the NSM4000 appliance Settings menu, enter 4 at the prompt.
2.
Enter y at the verification prompt to continue.
3.
Enter the new hostname and press
Enter
to return to the settings menu.
NOTE: If a hostname consisting of 4 or more labels is changed to a
different hostname, also with 4 or more labels, the previous hostname
alias might remain in the
/etc/hosts
file. This condition can be corrected
by manually editing the
/etc/hosts
file.
Adding DNS Servers
You can add up to three DNS servers. Enter each one using dotted decimal notation.
Each addition returns you to the main menu. If you want to add more DNS servers, repeat
the following procedure.
To add the DNS servers:
1.
On the NSM4000 appliance Settings menu, enter 5 at the prompt.
2.
Enter 1 to add a name server.
3.
When prompted, enter the new name server in dotted decimal notation.
Copyright © 2016, Juniper Networks, Inc. 58
NSM4000 Appliance Hardware Guide