Juniper NSM4000, Руководство по оборудованию

Страница: 45 / 196

To mount the NSM4000 appliance front and rear flush to a rack:
1.
Insert four rack-mount screws on each side of the appliance to secure the front of the
chassis to the equipment rack.
2.
Slide the rear-mount rail brackets into the backs of the front rails on either side of the
chassis and align with your rear equipment rack posts, as shown in
Figure 6 on page 31 .
3.
Secure the rear-mount rail brackets to your equipment rack with two rack-mount
screws each.
4.
Insert locking screws on the sides of the rear-mount brackets to secure the front and
rear mounting brackets in place.
Figure 6: Front-and-Rear-Mounting Flush to a Rack
5.
Verify that the mounting screws on one side of the rack are aligned with the mounting
screws on the opposite side and that the appliance is level.
Related
Documentation
Front-and-Rear-Mounting the NSM4000 Appliance Recessed in a Rack on page 31
•
•
NSM4000 Appliance Rack Requirements on page 25
•
Mid-Mounting the NSM4000 Appliance in a Two-Post Rack on page 32
•
Tools and Parts Required to Install the NSM4000 Appliance on page 26
Front-and-Rear-Mounting the NSM4000 Appliance Recessed in a Rack
This mounting option provides additional front clearance in the equipment rack. It is used
for a larger chassis that requires additional support when mounted on the rack-mount
system.
To mount the NSM4000 appliance front and rear recessed in a rack:
1.
Remove the rear screws on each side of the appliance’s front rails and the two small
screws toward the front of the chassis.
2.
Loosen the side-rail screws of the chassis and slide the front rails of the system
backward, as far as they will move.
3.
Tighten the side-rail screws.
31 Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Installing the Appliance