Juniper NSM4000, Руководство по оборудованию

Страница: 53 / 196

10.
Attach the plastic safety cover.
11.
Close the input circuit breaker.
The NSM4000 appliance starts powering on when you supply power to the power supply
module. If the power supply module is correctly installed and functioning normally, the
LED on the power supply module displays green when the power supply module is
powering the appliance, and amber when the power supply module is in standby mode
(not powering the appliance).
Related
Documentation
DC Power Grounding Requirements and Warning on page 164
•
•
DC Power Supply in the NSM4000 Appliance on page 17
•
General Electrical Safety Guidelines and Warnings on page 157
•
DC Power Disconnection Warning on page 163
•
DC Power Wiring Sequence Warning on page 165
•
DC Power Wiring Terminations Warning on page 167
•
Preventing Electrostatic Discharge Damage on page 158
Connecting an NSM4000 Appliance to a Management Console
You can configure and manage an NSM4000 appliance by using a dedicated console.
Every appliance has a console port with an RJ-45 connector. Use the console port to
connect the appliance to the management console or to a console server. Ensure that
you have an Ethernet cable with an RJ-45 connector available. An RJ-45 cable, as shown
in
Figure 12 on page 39 , and an RJ-45 to DB-9 serial port adapter are supplied with the
appliance.
Figure 12: Ethernet Cable Connector
To connect the appliance to a management console:
1.
Connect the RJ-45 to DB-9 serial port adapter to the serial port of the management
device (laptop or PC) that you will use to access the NSM4000 CLI.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and
you want to connect your laptop or PC directly to the appliance, use a
combination of the RJ-45 to DB-9 female adapter supplied with the
appliance and a USB to DB-9 male adapter. You must provide the USB
to DB-9 male adapter.
2.
Connect one end of the Ethernet cable into the console port (labeled
CONSOLE
) on
the front panel of the appliance.
39 Copyright © 2016, Juniper Networks, Inc.
Chapter 6: Connecting the Appliance