Judo JUD-HH 6-100, Инструкция по установке и эксплуатации

Страница: 21 / 48

Installation and operating instructions: JUDO UNIDOS digital dosing pump systems JUD-KH 6-50 and 6-100 (cold water) / JUD-HH 6-50 and 6-100 (hot water)
All rights reserved. JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH Postfach 380

D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval. Tel. +49 (0)7195-692-0

Fax +49 (0)7195-692-188
Revision level: 20.04.2017 E-Mail: info@judo.eu

Internet: www.judo.eu
21
Fig. 4: Connection of the dosing pump Fig. 5: Suction and dosing pipe connection
Suction pipe:

Guide the suction pipe through the union nut of the suction kit and the appropriate clamping ring,
then plug correctly on to the appropriate connecting cone of the insert.

Correctly secure the union nut at the connection of the suction kit so that the connection is leak-
tight.

Cut the suction pipe to the necessary length.

Guide the suction pipe through the union nut of the suction valve and the appropriate clamping ring,
then plug correctly on to the appropriate connecting cone of the insert.

Correctly secure the union nut at the connection of the suction valve so that the connection is leak-
tight.
Bleed pipe:

Correctly plug the bleed pipe on to the connection of the dosing head, cut to the necessary length
and lead with a clear outlet into the dosing tank.
Dosing pipe:

Guide the dosing pipe through the union nut of the dosing valve and the appropriate clamping ring,
then plug correctly on to the appropriate connecting cone of the insert.

Correctly secure the union nut at the connection of the dosing valve so that the connection is leak-
tight.
Bleed valve
Dosing pipe
Suction pipe
Bleed pipe
Union nut
Clamping
ring
Insert
with connecting
cone
Discharge opening