jotron 103660, Руководство оператора и инструкция по установке

Страница: 84 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 84 of 104
10.6.5 History
If the transmitter functionality of the transponder stops
functioning for more than 15 minutes, this is logged as an
event in the History Log .
10.6.6 Self test
The “Self Test” consist of two different tests, a
“Transponder self test” and a “Display self test”:
“Transponder self test” measures values of:
Signal strength (RSSI.. 0-255)
RF Power ( Reflected : 0-512 )
Antenna matching (VSWR)
Voltages ( 3, 5, 8 and 14v)
Receivers status
Transmitter status
Power source (Main, Backup)
When “Display test” is selected, this window is shown with
measurement:
Voltages
Supply source (Power source)
Light sensor reading (If automatic display
adjustment are activated [option])
10.6.7 System
In this window you can read information about :
Serial number
Software
Hardware of both Display and Transponder unit
In addition you may select the buttons:
Change password
Update firmware
Inland