jotron 103660, Руководство оператора и инструкция по установке

Страница: 67 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 67 of 104
10.3.2.1 View Custom defined Regions
For Custom defined Regions (Either
configured by the operator or configuration
is received from an AIS Base Station in a
special message) the Region have in addition
North East position and a South West
position defining the area in which the
special settings of :
Channels
Tx/Rx mode
Power
Transition zone
10.3.3 Add region
The user is allowed to Add Regions, but caution is advised (see 10.3).
It is not allowed to delete regions, they will be deleted on timeout after 24 hours inactivity, if the ship is more than
500NM away from the region, or if the region is overwritten. There is a maximum amount of 8 regions in addition
to the HIGH SEA region
When “Add Region” is selected, default
values for Channels, Tx/Rx Mode, Power and
Transition zone are configured, but all these
parameters may be altered together with
defining position of the North East and South
West corners of the Region.