jotron 103660, Руководство оператора и инструкция по установке

Страница: 78 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 78 of 104
10.6.1.4 Pilot port
The AIS system has the flexibility of either connecting the
Pilot port to the Transponder unit or to the Display unit. This
have to be choosen in the Pilot port setting menu.
By enabling Restricted mode, the pilot port in use will be in
output mode only. Any attempt to configure and change
setting through external commands will be prohibited. If the
pilot port is connected to the Display, the transponder port
(Pilot / Ext. Display 4) will act as a fully functional External
display, even if Restricted mode is enabled in the menu.
See chapter 8.3.2.6 and 8.3.3.3 for information regarding connection of the pilot port.
10.6.1.5 Long-Range/ECDIS
The Transponder has the flexibility of using the Long-Range
port as an external display (ECDIS) port if the Long-Range
functionality is not needed.
Changing this option requires a reboot of the Transponder.
See chapter 8.3.2.1 for information regarding connection of
this port.
10.6.1.6 Baud rate
Press one of the 5 Port buttons to change the baud rate of
that port.
It will then jump between the legal options:
4800 (default: Sensor)
9600
19200
38400 (default: Long-Range)